MT-101

MT-101 chemically combines rust and scarred metal to create an almost impenetrable, virtually indestructible shell which is impervious to the effects of oxygen and moisture. The bonded coating is oblivious to most forms of environmental degradation and will provide up to 1 year of rust-free protection

Features

Typical application:

MT-101 is recommended for use on all steel surfaces as a rust converter primer. The product can be used in situations where proper cleaning or sandblasting is difficult.

Theoretical Spread Rate:

150-250 sq.ft/gal @ 1mil

Application:

It is recommended that any loose rust be removed with a wire brush and the rusty steel surface washed with high-pressure water to remove excess salt contamination. Brush or spray MT-101 with no surface show-through at 1-2 mils wet film thickness. Spray application is preferred to ensure penetration into the rust. The coating can be applied to dry or damp surfaces. A second coat of MT-101 should be applied within 30-60 minutes after the first application to ensure maximum protection. Allow to dry for 8-12 hours before applying a Topcoat.

Safety Data Sheet (PDF)Download

Benefits

MT-101 converts rust quickly and can be applied under varying weather conditions:

Provides >800 hours of corrosion protection with 1-mil application under Salt Spray conditions;
(ASTM B 117) on pre-rusted steel parts;
Works even in the presence of excess salt contamination;
Provides excellent protection against re- rusting;
Promotes top-coating adhesion;
VOC compliant and AQMD Compliant;
Environmentally friendly, non-toxic;
Non-flammable, non-combustible.

MT-101 is non-corrosive and will not damage metal or plastic surfaces and will not damage or contaminate metals or welds.

MT-101 is non-toxic, non-reactive, non-corrosive, non-hazardous and non-flammable.