Skip to content

The Masters Touch
MT-30 ARMORED VEHICLE SEALING

GET A FREE QUOTE
MILITARY

MT-30 ARMORED VEHICLE SEALING

Master's Touch MT-30 is a high-performance hybrid sealant and adhesive. This technical evaluation details its operational deployment across military land systems, including heavy armored fighting vehicles (e.g. M1 Abrams Main Battle Tank) and light tactical vehicles (e.g. HMMWV).

Tested and approved by the Naval Sea Systems Command (NAVSEA), MT-30 has been supplied and deployed across U.S. Navy shipyards and integrated into defense equipment maintenance programs. NSN: 8030-01-443-7388. Color: Navy Gray.

Technical Evaluation (PDF) MT-30 TDS
MT-30 hybrid sealant application on an M1 Abrams tank
Technician sealing an armor-plate seam on a tank with MT-30
M1 ABRAMS

M1 ABRAMS APPLICATION AREAS

Critical joint, seam and interface areas for MT-30 on the M1 Main Battle Tank platform:

  • Turret Ring & Hull Interface Sealing:
    Protects sensitive bearings, optics and electronics against high-pressure water ingress, chemical washdowns and mud accumulation.
  • Armor Plate & PCMS Tile Seams:
    Ensures a moisture-tight seal between composite armor modules or Passive Countermeasures System (PCMS) tiles without shrinking or cracking.
  • Engine Deck & Exhaust Housings:
    Withstands severe vibration and service temperatures up to 220°F (intermittent to 270°F).
  • Underbody NBC / Fording Seals:
    Maintains continuous air and watertight integrity along belly plates and access hatches during deep-water fording.
HMMWV

LIGHT TACTICAL VEHICLES (HMMWV)

On light tactical wheeled vehicles, MT-30 provides weatherproofing, sound-dampening and anti-corrosion sealing:

  • Cab & Roof Seam Sealing:
    Prevents water leakage across overhead composite cab panels and aluminum roof joints.
  • Windshield & Door Frame Weather-sealing:
    Flexible +/-50% joint movement capability absorbs chassis twist and frame flex during extreme off-road maneuvers.
  • Floor Pan & Wheel Well Gaskets:
    Protects floor-pan armor inserts and underbody seams from corrosion caused by salt, mud and harsh field contaminants.
Door and roof seams on an unmarked tactical humvee
A gloved hand smoothing sealant on wet armor plate
TECHNOLOGY

CHEMICAL BONDING & OPERATIONAL ADVANTAGES

Traditional polyurethane caulking compounds require wash-primers and mechanical interlocking, making them prone to micro-delamination and joint failure under thermal shock or dew point shifts. MT-30 uses Silane-Hybrid Technology to establish direct molecular bonds to metal and alloy substrates.

  • Primeless Adhesion:
    Adheres directly to military-grade aluminum (6061-T6) and armored steel plates with zero wait time.
  • Damp & Wet Substrate Curing:
    Immediately rain-ready and cures underwater or on wet substrates without wash-off or loss of adhesion.
  • Non-Slump Versatility:
    Gun-grade consistency allows effortless application on vertical turret skirts and overhead hull plates.
  • Zero Shrinkage & High Durability:
    100% solids, solvent-free formulation tested to 10,000 hours of QUV accelerated weathering (ASTM G154).
COMPLIANCE

GOVERNMENT & MILITARY COMPLIANCE

  • NAVSEA Approved & Fleet Deployed
    NSN 8030-01-443-7388.
  • ASTM C920
    Type S, Grade NS, Class 25, Uses NT, T, M, G, A & O.
  • TT-S-00230-C
    Type II, Class B.
  • ASTM E84
    Class A fire rating. CARB & SCAQMD compliant (17 g/L VOC).
Sealed rim of a closed armored-vehicle hatch
MILITARY

PHYSICAL & MECHANICAL PERFORMANCE

PropertyStandard / Test MethodPerformance Result
ViscosityMT Test Method2,000,000 cps (Spindle 7, 4 rpm)
DensityASTM D147513.5 lbs./gal
HardnessASTM C66127 (Shore A)
Tensile StrengthASTM D412145 PSI
Elongation at BreakASTM D412600%
Joint MovementASTM C920+/-50%
Flame Spread / SmokeASTM E84Class A (0 Flame / 0 Smoke)
Service TemperatureMT Test Method-75°F to 220°F (intermittent to 270°F)

Contact

Enquiry form

Tell us about your environment and our team will recommend the right coating.