MT-30 AVIATION APPLICATION
Master's Touch MT-30 is a high-performance, silane-functional hybrid sealant and adhesive approved by the Naval Sea Systems Command (NAVSEA) and deployed across U.S. Navy shipyards (NSN: 8030-01-443-7388).
This evaluation covers the suitability of MT-30 for military, defense and commercial aviation maintenance, repair and overhaul (MRO). Document reference: MT-30-AERO-EVAL-2026 | CAGE Code: 9YY84.
PRIMELESS SILANE BONDING
Traditional aerospace polyurethanes rely on mechanical interlocking achieved through multi-stage wash-primers. In environments with extreme thermal swings and rapid dew-point shifts, wash-primers can suffer micro-delamination and moisture trapping.
-
Primeless Adhesion:
Direct covalent silane bonds with aerospace metal substrates (6061-T6 / 7075-T6 aluminum) and composite polymers, without primer. -
Zero Wait Time:
Eliminates wash-primer flash-off, accelerating assembly and aircraft turnaround time. -
High Molecular Stability:
Resists primer degradation and environmental weathering, preventing crevice corrosion on exterior airframe skins.
TARGETED AIRCRAFT APPLICATION ZONES
-
A. Avionics & Radar Enclosure Sealing:
Radar domes (radomes), avionics compartments and instrument enclosures. Cures to a high-density, solvent-free seal with zero shrinkage, protecting electronics against moisture and dust. -
B. Cockpit & Flight Deck Canopy Sealing:
Canopy framing, windshield perimeter joints and flight deck access doors. Resists high-altitude UV (10,000 hours QUV, ASTM G154) and maintains 600% elongation to absorb vibration and cabin pressure differentials. -
C. Wing-to-Fuselage & Aerodynamic Fairings:
Wing-to-body fairings, control surface gap sealing and exterior access panels. Smooth, high-adhesion seams that maintain aerodynamic integrity. -
D. Subfloor, Wet Areas & Cargo Enclosures:
Galley floors, lavatory subfloors and cargo hold moisture barriers. Cures on damp substrates with ASTM E84 Class A fire and smoke rating (Flame Spread: 0, Smoke Developed: 0).
COMPLIANCE & CERTIFICATION
-
NAVSEA Approved & Fleet Deployed
NSN 8030-01-443-7388. -
ASTM C920
Type S, Grade NS, Class 25, Uses NT, T, M, G, A & O. -
Federal Specification TT-S-00230-C
Type II, Class B. -
ASTM E84 Class A fire rating
CARB & SCAQMD environmental VOC compliant.
STRATEGIC CONCLUSION
MT-30 demonstrates strong engineering adaptability for non-fuel-tank aviation applications. Its NAVSEA-verified primeless silane bonding, zero shrinkage, Class A fire performance and high elongation make it a reliable sealant for radome enclosures, wing fairings, wiring bulkhead pass-throughs and cabin subfloors.
PHYSICAL & MECHANICAL PROPERTIES
| Property | Tested Result | Standard / Method | Aviation Suitability |
|---|---|---|---|
| Viscosity | 2,000,000 cps (Spindle 7, 4 rpm) | MT Test Method 2000 | Non-slump, gun-grade consistency for overhead flight deck / cargo hold seams. |
| Density | 13.5 lbs./gal | ASTM D1475 | Balanced elastomeric weight profile for structural joint sealing. |
| Hardness | 27 (Shore A) | ASTM C661 | Flexible formulation capable of dampening airframe engine vibration. |
| 100% Modulus | 0.6 MPa | ASTM D412 | Accommodates cyclic structural deflection during high-G maneuvers. |
| Tensile Strength | 145 PSI | ASTM D412 | High cohesion under high aerodynamic shear forces. |
| Elongation at Break | 600% | ASTM D412 | High flex capacity under airframe flex and thermal shock. |
| Flame & Smoke Spread | Class A (Flame: 0, Smoke: 0) | ASTM E84 | Zero-smoke safety profile for interior cabin and bulkhead pass-throughs. |
| VOC Content | 17 g/L (isocyanate & solvent-free) | ASTM D2369 | Safe, low-odor application in enclosed aircraft maintenance hangars. |
| QUV Accelerated Weathering | Pass (10,000 hours) | ASTM G154 | High solar UV stability at high flight altitudes. |
Contact
Enquiry form
Tell us about your environment and our team will recommend the right coating.